Pairing the 100 Series Bluetooth Remote Control

This answer applies to:

• R410
• R610
• R810

Before pairing the 100 Series Bluetooth remote control we advise that firstly you fully charge the remote by using the supplied cable plugged into the USB-C socket on the rear of the main unit or any other USB-C outlet socket. If the battery power is low then the indicator light displays red while charging and changes to white when charged.

Once charged, to pair the remote, press the menu button on your 100 Series unit and then scroll to System Settings. Click the control knob to select and then scroll to Remote and click again to select. Next hold down both the skip keys on the remote control for three seconds or until the white indicator light starts to slowly pulse. Now select Pair remote and next you will see Scanning and then Remote paired will then be displayed once connection has been established. Your 100 Series remote is now paired and ready to use.

PLEASE NOTE that if the remote is not used for a while, then it enters sleep mode to conserve battery power. When in sleep mode, it will take a second or so to wake up and reconnect, but this is normal behaviour.

Did this answer your question?

If not, please do not hesitate to contact us via our support enquiry form.